Activate device
Juno Stick™- Setting up your Juno Stick is very simple. All the drivers and applications will be installed automatically for computer systems that are supported.
- Plug your Juno Stick into your computer.
- Follow the onscreen instructions to install the necessary system drivers. It may take a few minutes to complete the setup.
- When the setup is complete, the Juno Stick will automatically detect the signal and establish a connection.
- Once the signal is detected, open your web browser and you will be redirected to the Juno activation website with instructions for how to complete the device activation.
If the system drivers are not automatically detected or installed, make sure that your computer meets the minimum system requirements.
Juno HotSpot - To set up your Juno HotSpot: - Unpack your Juno HotSpot.
- Your HotSpot may arrive fully charged and ready to go. If not, just plug it into an electrical outlet using the wall charger to recharge the battery (you can also recharge the battery by using your computer's USB port, although this will take longer).
- Turn on the Juno HotSpot by pressing and holding the Power button until the screen lights up. The power button symbol looks like this
 - After the power up sequence, the Juno HotSpot will automatically detect the signal and establish a connection.
- The network name (SSID) and key will either be displayed on the front or back of your Juno HotSpot.
- If you're using a computer, open the list of available networks to find the Juno HotSpot (if you're using a different Wi-Fi enabled device, consult the user's manual for instructions on connecting to a wireless network).
- Select the Juno network (SSID,) and enter the password key information to connect to the Juno HotSpot.
- Once the signal is detected, open your web browser and you will be redirected to the Juno activation website with instructions for how to complete the device activation.
Juno® 4G Home Wireless Broadband Device - To set up your Juno® 4G Home Wireless Broadband Device: - Unpack your Juno® 4G Home Wireless Broadband Device.
- Plug the Device to a power outlet. There is no power button and the Device will power up automatically.
- After the power up sequence, the Device will automatically detect the signal and establish a connection.
- To connect a device via Wi-Fi, use the Juno network (SSID) and password key information to connect to the Juno® 4G Home Wireless Broadband Device. The SSID and key will be displayed on the side of your Device.
- To connect a device via network cable, plug one end of the cable to your device and plug the other end in one of the Ethernet ports at the back of the Juno® 4G Home Wireless Broadband Device.
- Once the signal is detected, open your web browser and you will be redirected to the NetZero activation website with instructions for how to complete the device activation.
In order to connect to the internet, you must be within the Juno coverage area. To check where service is available, please visit our Coverage Map.
| |
Account & Billing Information 
