Help Center Home

 Billing History &
        Account Info
 

 My Password

 Update My Payment Info

 Update My Address

 Upgrade My Account

 Billing Questions

 Access Numbers

 Connection Issues

 Email Questions

 Get Juno Software

 Safety/Security

 Contact Us

 
Select a different
Operating System

Common Windows Errors / Solutions

Error: TCP/IP not installed

If you receive this error when installing Juno, you will need to install the Network Component TCP/IP before continuing with the Juno installation.

Let our new Connection Wizard pinpoint your problem!

The Juno Connection Wizard is our newest help tool. Download it today to identify and resolve many common issues that may prevent you from successfully connecting to the Internet.

To use the Juno Connection Wizard, you will need to have a Windows Operating System (other than Windows NT) running on your computer. If you cannot download the Juno Connection Wizard from your computer, simply download it onto a diskette from any computer with Internet access and then install it on the computer you would like to fix.

Click here to download the Connection Wizard.

Please follow the instructions below to install TCP/IP.

IMPORTANT!
Before continuing, you must first ensure that you have (DUN) Dial-up Networking installed on your computer.

  • On your desktop, double-click the My Computer icon.
  • If you do not see an icon labeled Dial-up Networking, click here to install it.

First, you must re-boot your computer and modem

  1. Save all unsaved work and close all programs.
  2. Click on the Windows Start button select Shut Down.
  3. Check the circle next to Restart and click OK.
  4. If you have an external modem, turn its power off then on. If there is no on/off switch on the modem, you may have to unplug the modem's power supply.
  5. Once the computer has finished booting up, retry your Juno connection.
  6. If you still receive this error message, please follow the instructions below to configure Windows network components for DUN and modify your system settings.

Configuring the Windows Network Components for Dial-Up-Networking

The following instructions are for those systems that are not on a Local Area Network (LAN). If you are on a LAN and follow these directions, you may create a conflict that will disrupt your computer's connection to your LAN. Please contact your network administrator for assistance before you continue making any changes to the system configuration.

  1. Click on the Windows Start button, point to Settings and select Control Panel.
  1. Double-click the Network icon.

    IMPORTANT!
    Before making any changes to your Network settings, please ensure that you have your Windows CD.
  1. What you will find listed under the Configuration tab will depend on your version of Windows. Juno requires three network components total, but you may have more or less listed. The three that are required are:
    • Client for Microsoft Networks
    • Dial-Up Adapter
    • TCP/IP
    Note: You may see TCP/IP->Dial-up Adapter grouped together.

If Client for Microsoft Networks is not listed, you will need to add it:

  1. Click on the Add button.
  1. Select Client.
  2. Click on the Add button.
  1. Under Manufacturers, select Microsoft.
  2. Under Network Clients, select Client for Microsoft Networks.
  3. Click OK.

    Note: This may automatically add all three components.

If Dial-Up Adapter is not listed, you will need to add it:

  1. Click on the Add button.
  1. Select Adapter.
  2. Click on the Add button.
  1. Under Manufacturers, select Microsoft.
  2. Under Network Adapters, select Dial-Up Adapter.
  3. Click OK.

If TCP/IP is not listed, you will need to add it:

  1. Click on the Add button.
  1. Select Protocol.
  2. Click on the Add button.
  1. Under Manufacturers, select Microsoft.
  2. Under Network Protocols, select TCP/IP.
  3. Click OK.

Once you have confirmed that the three required Network components are installed, check your network settings to ensure that TCP/IP is correctly configured.

Check Network Settings

    Note: In the Primary Network Logon drop-down menu, ensure that Client for Microsoft Networks is selected.
  1. Double-click TCP/IP->Dial-Up Adapter.

    Note: If you get a TCP/IP Properties Information window, click OK.
  1. Ensure that only the circle next to Obtain an IP address automatically is checked.
  2. Select the WINS Configuration tab.
  1. Ensure that only the circle next to Disable WINS Resolution is checked.
  2. Click OK. You will be prompted to re-boot your computer.
  3. Click OK.

Retry the Juno connection.




 
Juno Home | My Juno | Help | My Account | Corporate | Join Now
About Juno | About United Online | Our Services | Investors | Press | Privacy Policy | Your Privacy Rights: Do Not Sell My Info  | About Ads  |   Terms of Service

        United Online                NetZero        |        Juno        |        MySite    

© 1995-2020 Juno Online Services, Inc. Juno is a registered trademark, and the Juno logo is a trademark of Juno Online Services, Inc.
NGCV